How to Use a Pressure Washer to Clean Your Home’s Exterior

Before using a pressure washer to clean the exterior of your home, it’s important to learn how to safely use one. To start, you should remove any plants or furniture. You also should secure extension hoses to the ground so they don’t touch power lines. You should also cover any doors and windows with plastic sheeting. If they aren’t completely covered, use duct tape to secure them. If the doors or windows are particularly leaking, cover them with duct tape.

The first thing to remember when using a pressure washer is that it is dangerous. The water may cut into siding, brick, and other hard surfaces. Therefore, you must stand far enough away from the exterior of your home to avoid getting cut. Depending on the PSI rating of your washer, this distance could range from 18 inches to 6 feet. In addition, you should always use a fan-spray nozzle for the exterior of your home, as this is safer than using a stream nozzle.

When using a pressure washer, you must also remember that the angle of the water stream affects the strength of the spray. For delicate surfaces, use lower pressure, while for tougher muck, use higher pressure. In addition, you can use chemical-based cleaning solutions to make the cleaning process even more efficient. When using chemical-based cleaning solutions, keep in mind that lead paint is especially dangerous and should not be power-washed.

Before using a pressure washer, you should always test it in an inconspicuous area first. You should carefully examine the area and check for any etching, denting, or peeling. Remember to remove non-water-resistant electrical fixtures and cover outdoor outlets. Clear the area surrounding your home and make sure all fragile items are out of the way. If you are cleaning the exterior of your home, you should also protect flowerbeds. Then, angle the pressure washer so that you don’t damage the soil.

If you’re not comfortable using a pressure washer, you can hire someone to do it for you. They can help you choose the right detergent and the correct pressure setting for your cleaning project. Pressure washing can be a great way to clean the exterior of your home, but it’s important to use safety precautions and follow the manufacturer’s instructions. For instance, never point the nozzle at anyone, and be careful around windows and openings.

Before using a pressure washer to clean the exterior of your home, be sure to wear eye protection. The high pressure generated by a pressure washer can cause injury to people and animals, and you should always wear protective gear before operating one. Also, be sure to hold the wand securely with both hands. Make sure to keep the sprayer 18 inches from the surface. Never use high-pressure washers on painted surfaces, as the water could cause them to deteriorate.

A pressure washer can remove hard dirt and substances that have built up from years of exposure to weather. However, it can also damage the exterior of your home if not used properly. A pressure washer should be used by a professional if your home is very tall. However, if your home is single-story, you can safely pressure wash it to improve the curb appeal of your house.

Leave a Reply

Your email address will not be published.